Touch Screen Digital Automatic Spring Tension & Compression Testing Machine
Product introduction:
This testing machine is mainly used to measure the tensile test and compression test of various coil springs. It can test both the spring load under a certain deformation and the spring deformation under a certain load.
Main Function Introduction:
★ZCTEST is a set of measurement and control software specially developed for spring tension and compression testing machine, which integrates data acquisition, motion control and data analysis. It has complete independent copyright;
★ four test methods, two test types, backhaul detection, reciprocating detection, etc.
★ The whole process of the test runs at a constant speed to avoid the interference of the machine acceleration and deceleration on the test force, and the true reduction test process;
★The system comes with a sample library, preset 20 kinds of samples, the user can set the corresponding parameters according to the requirements, can be directly transferred during the test, improve the test efficiency and reduce the operation difficulty;
★Automatic storage of test data, can store 100 sets of data, can be viewed, printed, exported, etc.
Technical specifications:
Max test force
|
2000N
|
Display type
|
7 inch industrial touch screen
|
Test force range
|
1%-100%
|
Min reading value of test force
|
0.1N
|
Relative error of zero point
|
±0.1%
|
Relative error of test force indicating value
|
±1.0%
|
Relative error of indicating value repeatability of test force
|
1.0%
|
Resolution of displacement
|
0.001mm
|
Test space
|
300mm
|
Diameter of pressure plate
|
120mm
|
Parallelism error of up and down pressure plate
|
≤0.10 mm
|
Test speed range
|
0.01mm/min-500mm/min
|
Error of deformation indication value
|
≤±(50+0.15L)
|
Size of testing machine
|
560*350*1000mm
|
Weight of testing machine
|
90kg
|
Protection function
|
Over-load protection function
|
Power supply
|
AC 220V±10% 50Hz
|